2023 J Boats J/80

Request Info

Print Basic Brochure Print Full Brochure

Sailing can be the world's best family sport. The key is a boat that holds the attention and interest of many types of sailors, young and old. J/80 does it all, with thrilling 15 knot rides under spinnaker or relaxed sunset cruises with mainsail only. SAILING WORLD rated J/80 as easier to handle, less intimidating, safer and better suited for sailing offshore than other modern sportboats tested. If you would like to expand your sailing horizons with a modern sportboat outside protected harbors and lakes, there's only one choice: the J/80.

Basic Boat Info

Make: J Boats

Model: J/80

Year: 2023

Condition: New

Category: Sail

Construction: Fiberglass

Keel Type: Bulb Keel

Dimensions

Length: 26'4 ft

Waterline Length: 22 ft

Beam: 8'4 ft

Max Draft: 4'11 ft

Other

Boat Class: Racers

More Info :

Standard Features
Hull & Deck Construction

Composite hull and deck of GRP balsa sandwich with E-glass fabrics, additional reinforcing in way of highly loaded hardware.
Vinylester and ISO NPG gelcoat in hull for osmotic gelcoat blister protection.
Molded GRP main bulkhead to absorb the direct loads of the shrouds and mast compression.
Mast step loads are distributed to aluminum frame fastened to the main bulkhead.
Hull is reinforced in way of keel with several transverse molded stringers.

Deck Hardware

Large modern cockpit with molded foot braces on centerline.
Non slip finish to all horizontal deck surfaces in white.
Molded Toe-rail forward.
Bolts, screws and fitting are all made of stainless steel, marine grade anodized.
Stainless steel forestay attachment plate.
Stainless steel pulpit single lifeline.
“U” bolt on the foredeck.
Stainless steel chain plates for cap shrouds, lower, shrouds and backstay.
Opening hatch (420 x 420 mm) mounted on cabin trunk forward of mast.
Two black anodized jib T tracks with cars.
Boom vang system (12:1) with swivel mounted cleats, on both sides of the coach roof.
Mainsheet traveler with coaming mounted (2:1) control line, cleats.
Mainsheet system (5:1) with swivel cam cleat and ratchet block on cockpit sole.
Cleats and blocks for backstay adjustment (4:1) led forward in cockpit to port and starboard.
Two 30:1 primary winches with cam cleats.
Internal bowsprit launching line led aft through fairleads to cabin trunk cam cleat.
Bullseye fairleads for furler control line (port with cam cleat) and tack line (starboard) to cabin side mounted clutch.
Two halyard storage bags shipped loose.
Spinnaker sheet blocks outboard of winches and aft.
Two stern pulpits.
Single continuous lifeline.
One fixed cabin window on each side of cabin side.
GRP main sliding hatch with acrylic one piece offshore drop board.
Winch handle.
Bow and stern running lights.

Keel & Rudder

Low VCG keel cast from lead and antimony, faired and finished with an epoxy primer and secured by way of stainless steel bolts to the integral molded hull sump.
Reinforced FRP rudder on transom with stainless steel fittings.
Laminated varnished wood tiller, with adjustable tiller extension.

Spars & Rigging

Mast and boom in anodized aluminum.
Headsail roller furling on headstay.
Two pairs of swept spreaders.
Stainless steel wire standing rigging with turnbuckle adjusters.
Backstay with adjustment tackle led to both sides of the cockpit.
Complete running rigging package.

Outboard Motor

Optional owner supplied, minimum 3.5hp long shaft recommended.
Low transom suitable for direct mounting of a 3 or 4 hp outboard.

Interior

Removable cabin sole.
Molded settee berths with access to storage below.
Large forward V-berth platform with two access panels above mast step.
Large removable molded step with space for an outboard and cooler to be stored aft.
Crane lifting bar integral to keel bolt system.
Interior reading light.
Electrical panel.
Battery box with straps (battery owner supplied).