2024 J Boats J/9

Manufacturers Specifiactions
Construction
- Hull and deck molded with biaxial and unidirectional E-glass fabrics and Corecell foam for optimal strength to weight
ratio. High density core inserts used in way of highly loaded hardware.
- White gelcoat hull with single boot stripe (in Flag Blue option).
- ISO NPG gelcoat and vinylester resin on the outer hull layer to prevent osmotic gelcoat blisters.
- White gelcoat deck with molded non-skid on horizontal deck surfaces.
- High strength, inward turning and overlapping hull to deck joint.
- Molded ISO/ORC height foredeck toe-rails on foredeck.
- Large self-draining cockpit with wrap-around seating and angled backrests.
- Two large cockpit seat storage lockers.
- Swim platform with transom boarding access and optional fold-up swim ladder.
- Molded, structural transverse keel support beams.
- 4.9' draft low VCG lead keel bonded and bolted to keel sump.
Steering System
- High aspect, balanced spade rudder mounted in self-aligning, low friction rudder bearings.
- Custom laminated, varnished, curved tiller.
- Spinlock adjustable tiller extension with handle.
Electrical
- One AGM Group 27 battery.
- 12V DC On/Off battery switch.
- 12V DC electrical distribution panel w/ 4 circuit breakers.
- LED navigation lights.
- UL approved stranded, tinned copper ABYC color-coded wiring.
- Bonding system to meet ABYC regulations.
- Two swiveling LED reading lights in main cabin.
- Two red/white dome lights.
- Automatic electric bilge pump and panel switch for manual operation.
Deck Hardware
- SS fabricated chainplates for shrouds.
- Foredeck skylight hatch mounted on cabin house forward of mast.
- Two opening portlights on cabin house sides.
- Companionway opening with molded seahood and slider.
- Acrylic offshore removable dropboard with inside/outside lockable hasp.
- Two 2-Speed Harken 35:1 self-tailing winches on cabin top.
- Two 10" lock-in winch handles with winch handle pockets.
- Two fixed jib tracks on cabin top with plunger-style jib cars. Option for self-tacking jib system.
- 5:1 Harken mainsheet system leading to boom-mounted ratchet block/cam near the tiller.
- Adjustable backstay system with control lines led to the cockpit.
- Harken jib furling system with control line led to cockpit.
- Halyard lead blocks mounted at mast base, halyard organizers and Spinlock double rope clutches one per side.
- Stainless bow rail, stanchions and stern rails with single 20? height lifeline, starboard boarding gate and transom gate.
- Foredeck and transom mooring cleats (4).
- Cockpit operated manual bilge pump operable from the helm.
Spars & Rigging
- Tapered, fractional, keel-stepped Sparcraft aluminum mast with single sweptback spreaders attached with stainless thru-bar. Mast includes halyard sheaves, fittings for boom and boom vang attachments, masthead crane, shroud termination points, lazy jack attachment points, and a steaming light. Spars are anodized and powder-coated white.
- Aluminum boom with 8:1 outhaul, mainsheet attachment points, sheaves for the outhaul and reef line, and lazy jack eye straps (shipped loose).
- Standing rigging: 1x19 wire forestay & side rigging with adjustable open-body turnbuckles. Soft Dyneema backstay.
- Running rigging package including main halyard, jib halyard, main sheet, two jib sheets, reef line, furler line, lazy jacks.
Interior
- Main cabin with full length settee berth and removable backrest to port, double seat to starboard, storage compartments outboard and below the berth/seats.
- Choice of Sunbrella fabrics for 3" standard main salon cushions.
- Teak and holly synthetic high-wear cabin sole in main cabin with centerline access to bilge.
- 36 Quart cooler.
- Angled companionway steps with nonskid treads.
- Molded V-berth supports (option for V-berth platform & cushions).
- Head platform with Raritan PH-II WC, TP holder, holding tank and deck pump out fitting.
- Centerline storage aft of companionway (or engine compartment and systems w/inboard engine option).
- Air-dry gelcoat finish on interior hull & deck surfaces.

Optional Equipment
Options
- Two-tone deck.
- Self-tacking jib system, recessed into the cabin with athwartships Harken curved track and traveler car with jib sheet led internally to mast and then aft to clutch near cabin top winch.
- Sail-Away Package ? North Nordac mainsail and jib (choice of either 104% jib or 90% self-tacking jib); B&G Triton2 speed/depth instrument package; sprayed anti-foul bottom finish (in black) with barrier coat.
- Code Zero/A-Sail Deck Package ? fixed carbon bowsprit with tack line, two spinnaker sheets, halyard, and four turning blocks to lead the sheet tails to the cabin top winches.
- 110V 30amp Shorepower system with Blue Sea AC panel, Victron Blue Smart charger, Victron galvanic isolator, one interior 110V outlet & 30A Marinco inlet.
- V-Berth and Forepeak Trim package with platform, two cushions, varnished wood fiddle, swiveling reading light, stainless divider/handrail near head, mesh covering on forepeak bulkhead, two mesh storage bags.
- Inboard diesel engine (Yanmar 2YM15) with Saildrive and two-blade folding prop.
- Flexiteek synthetic cockpit floor and swim platform surfaces.
- Retractable/folding swim ladder.
- Comfort Group ? Sunbrella mainsail cover with J/9 logo, matching Sunbrella tiller cover, and four cockpit cushions with dry fast foam and mesh bottoms in white vinyl or Sunbrella. - Custom molded cockpit backrest cushions. - Boot stripe in flag Blue.

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.